M & I Systems, Inc.
4200 Aurora Avenue N.
Seattle, WA 98103
Info: (206) 547-7899
Fax: (206) 547-8875

 

Senders

Fuel and Water Level
Pressure
Temperature
Electrical Generator
Generator Sender Drive Key
Inductive/Magnetic Pickup
Rudder Angle Indicator

Fuel and Water Level


These products are available for varying tank depths and can be adapted to meet specific needs. The range includes swing arm sensors with analogue output signal and robust tube type sensors designed to withstand mechanical stress.

Fuel Tank Senders, Swing-Arm Type, 2 1/8",
Bolt Circle dia., left or right hand float arm travel

Single Station Reading, 12/24V (10-180 ohms)
Without installation Kit No. 226 451 (6-23" depth) 226 001
With Installation Kit No. 226 451 (6-23" depth) 226 002
Dual Station Reading, 12/24V (0-90 Ohms) (For using two fuel gauges with one sender)
With Installation Kit No. 226 451 226 008
With Floating Ground (6-21" depth) 226 403
Replacement US Fuel Sender, 12/24V (240-33 ohms)
Includes Installation Kit No. 226 451, standard ground 226 007
240-33 Ohms (E-F): Stewart Warner  
Datcon, Faria, Medallion & Teleflex  
Fuel Sender Installation Kit, 2 1/8" 226 451
Bolt-on fuel sender mounting kit; for fuel tanks without threaded mounting screw holes 226 451
Replacement Fuel Sender Gaskets 226 053
Neoprene-type, 2 1/8" 600 525
Fresh Water Stainless Steel Level Sender, 12/24V(10-80 ohms)
2 1/8" bolt circle, adjustable tank depths 8"-24", installation kit included. VDO single station 226 452

Tube Type Tank Units for VDO Adjustable Fuel Level Gauge 2 1/8" Bolt Circle

Length Number on Sender Part #
9 3/4" 82/6/97 224 062
11" 82/7/22 224 055
12 1/4" 82/5/136 224 063
15 15/16" 82/5/142 224 054
17 1/16" 82/5/98 224 066
19 5/8" 82/5/117 224 067
22" 82/7/5 224 003
23 7/16" 82/7/17 224 069
27 1/4" 82/5/11 224 004
31" 82/5/72 224 049
32 7/8" 82/5/34 224 051

3 1/8" Bolt Circle (For heavy duty use)

Length Number on Sender Part #
25 1/4" 82/9/48 224 070
28 3/16" 82/9/16 224 071
34 11/16" 82/14/3 224 074
36 1/16" 82/14/11 224 052

Back to Top

Individual Pressure Senders

Single Station Standard Ground
Description Thread Warning Contact # On Sender Part #
0-80 PSI/5 bar 1/8-27 NPT   29/4 360 003
0-80 PSI 1/8-27 NPT 7.0 PSI 30/23 360 009
0-80 PSI 1/8-27 NPT   N/A 360 801*
0-80 PSI 1/8-28 BSP   29/61 360 080
0-80 PSI 1/8-28 BSP 5.7 PSI 30/65 360 082
0-80 PSI 1/4-18 NPT   29/8 360 005
0-100 PSI 1/8-27 NPT 7.0 PSI N/A 360 086
0-100 PSI 1/8-27 NPT   N/A 360 811*
0-150 PSI 1/8-27 NPT   29/12 360 905
Single Station Floating Ground
Description Thread Warning Contact # On Sender Part #
0-30 PS 1/8-27 NPT   32/25 360 043
0-80 PSI 1/8-27 NPT   32/1 360 410
0-150 PSI 1/8-27 NPT   32/14 360 430
0-350 PSI 1/8-27 NPT   38/3 360 431
0-400 PSI/28 bar 1/8-27 NPT   38/8 360 406
Dual Station Standard Ground
Description Thread Warning Contact # On Sender Part #
0-80 PS 1/4-18 NPT   3/1 360 905
0-150 PS 1/8-27 NPT   3/2 360 034
Dual Station Floating Ground
Description Thread Warning Contact # On Sender Part #
0-150 PS 1/8-27 NPT   1/1 360 001
0-150 PS 1/8-27 NPT   1/2 360 002
0-150 PS 1/8-27 NPT   2/1 360 003
0-150 PS 1/8-27 NPT   2/3 360 004

*Please note: VDO senders have tapered threads. DO NOT use teflon tape or pipe sealant. This will interfere with grounding.

Back to Top

Individual Temperature Senders

Single Station Standard Ground
Description Thread Warning Contact # On Sender Part #
250°F/120°C 1/8-27 NPT   801/5/1 323 095
250°F 1/2-14 NPT 205° F 803/1/6 323 098
250°F 1/2-14 NPT 230° F 803/1/6 323 100
250°F M14 x 1.5 205° F 803/1/6 323 102
250°F M14 x 1.5   801/1/26 323 416
250°F M14 x 1.5   803/1/29 323 417
250°F 1/4-18 NPT   803/1/9 323 420
250°F 3/8-18 NPT   801/1/38 323 421
250°F 1/2-14 NPT   801/1/16 323 419
250°F 3/8-18 NPT   801/1/7 323 094
300°F/150°C 1/4-18 NPT   801/4/17 323 058
300°F 1/2-14 NPT   801/4/6 323 060
400°F/200°C 1/8-27 NPT   801/18/1 323 086
Single Station Floating Ground
Description Thread Warning Contact # On Sender Part #
250°F 1/4-18 NPT   805/1/7 323 477
250°F 3/8-18 NPT   805/1/5 323 479
250°F 1/2-14 NPT   801/1/16 323 419
250°F 1/2-14 NPT   805/1/4 323 478
Dual Station Standard Ground
Description Thread Warning Contact # On Sender Part #
250°F 3/8-18 NPT   801/2/4 325 008
250°F 1/2-14 NPT   N/A 325 010
250°F 1/4-18 NPT   801/2/1 325 001
Dual Station Floating Ground
Description Thread Warning Contact # On Sender Part #
250°F 3/8-18 NPT   805/3/3 325 007
250°F 1/4-18 NPT   805/3/1 325 002
Back to Top

Electric Generator Senders

Description Part #
RPM Reading Only
7/8-18 Thread 340 001
M22 x 1.5 Thread 340 002
RPM Reading with Average Hour Counter
7/8-18 Thread 340 008
Back to Top

Generator Sender Driver Key

Type Part #
152" 340 060
187" 340 061
203" 340 062
104" 340 065
200" 340 064
Back to Top

Inductive/Magnetic Pickup Sender

Type Part #
2" Long, 3/4-16 UNF Thread 340 020
Back to Top

Rudder Angle Indicator Sender

Type Part #
Single Station Transmitter for operating on VDO indicator 440 003
Dual Station Transmitter for operating two BDO indicators from one sender 440 004
Installation Kit connects transmitter arm assembly to rudder cable 440 050
Replacement Arm 440 100

Back to Top

Home | Contact Us | About Us